Multi-Di@g Access J2534 Pass-Thru OBD2 Device Produtos em Destaque from BRobd2.com 580USD
Multi-Di@g Access J2534 Pass-Thru Device is a VCI (vehicle communication Interface) enabling you to communicate with the ECU's according to the J2534 & J2534-1 specifications.
Beside ECU reprogramming, with the help of Multi-Di@g Office software vehicle diagnostic, maintenance and repair operations can be done in just a few clicks without being an electronic expert. More than 45 brands, a lot of new vehicles, a large deepness in diagnostic functions.
Functions:
After selecting the car manufacturer, then you can make the diagnosis for the different menus on offer (depending on cars models):
1.Maintenance
2.Air Conditioning
3.Pollution control
4.Liaison to the ground
5.Body
6.Post-Equipment
7.Braking
8.Motor
9.Expert Mode
Specification:
1.Language:
Bulgarian, Croatian, Czech, Danish, Dutch, English, Finnish, French, German, Hebrew, Hungarian, Italish, Polish, Portuguese, Romanian, Russian, Serbian, Slovenian, Spanish, Swedish, Turkish.
2.Characters:
Compliant to SAE J2534 & J2534-1
Either RS 232 or USB interfaces to PC
K-Line ISO 9141 (100 mA)
KWP 2000 ISO 14230-4
SAE J1850 PWM
SAE J1850 VPW
CAN 2.0B ISO 11898
CAN ISO 15765-4
SCI SAE J2610
Programmable power supply
On-board memory
3.Dimension:
Please pay attention Multi-Di@g Access J2534 Interface is not good at programming function. And it is not good at Japan cars.
Check Multi-Di@g Access J2534 Software Display at
http://www.brobd2.com/wholesale/multi-diag-access-j2534-pass-thru-obd2-device.html
Multi-Di@g Access J2534 Interface System Operation Interface Display and Office Usage Notes download for free!
http://www.brobd2.com/service/multi-diag-access-j2534-pass-thru-obd2-device.html